Product Description:
Precision Race Components Aftermarket Casting 6-Bolt 260cc Fully CNC Ported LS3 Heads. Assembled in the USA
When selecting your camshaft, please keep in mind that the largest camshaft you can run on a factory LS2 or LS3 short-block is our 235/248 camshaft! Anything larger will require you to cut valve reliefs in your pistons! All of our camshafts were designed on our SuperFlow 902 engine dyno on a factory LS3 engine, and the camshafts listed are our latest LS3 creations. They were created, ground, and tested all in-house! These camshafts are designed for maximum power on a stock LS2 or LS3 short-block without any piston-to-valve clearance issues.
***If you purchase a Melling oil pump you MUST use a single-roller timing set! The Melling oil pump will not clear a double-roller timing set!***
PRC's aftermarket casting LS3/L92/L99 cylinder heads come standard with the following options:
NEW PRC 13-Degree Valve Angle LS3 Castings
Improved Piston-to-Valve Clearance For Extra Compression & Larger Camshafts
Smaller Than Stock Intake Port Volume For Improved Port Velocity
Stainless Steel Hollow Stem 2.185" Intake Valves & Stainless Steel 1.60" Exhaust Valves
Integrated Rocker Pedestals
TSP .660 Spring Kit w/ PAC Valve Springs & Titanium Retainers
CHE Bronze Guides
Completely Assembled in the USA
68cc Chambers
All PRC cylinder heads are extensively researched and tested. The all-new PRC aftermarket casting LS3 cylinder heads are designed to flow considerably more than a gm ported casting while keeping the port sizes smaller for improved port velocity. The result is a cylinder head that is smaller than a stock GM LS3 port and moves more air than any other ls3 cylinder heads!
The all new PRC aftermarket casting LS3 heads are the perfect option for customers looking for the ultimate in LS3/L99/L92 cylinder head technology
The 13-degree valve angle will allow for the ability to run more compression and larger camshafts thanks to additional piston-to-valve clearance!!
|
Lift |
Intake Flow |
Exhaust Flow |
|
.200" |
157 cfm |
117 cfm |
|
.300" |
224 cfm |
170 cfm |
|
.400" |
279 cfm |
205 cfm |
|
.500" |
329 cfm |
225 cfm |
|
.600" |
360 cfm |
235 cfm |
| .650" | 372 cfm | 240 cfm |
| .700" | 380 cfm | 243 cfm |
With all PRC cylinder heads, quality and performance are their two highest priorities! In addition to performance, you will not find a better performing set of cylinder heads at this price (cost is for the pair!). Call one of our sales consultants today if you have any questions or if you would like to discuss your specific application.
