Product Description:
Mounts are black texture powder coated!
These will bolt Kirkey high-back style 55s into 1st gen S-series trucks and hide under the seat. Brackets are made of 11 Ga steel that is CNC Plasma cut and has multiple mounting holes at the floor for 3″ of travel. Upper holes can be enlarged to use Dzus fasteners for faster seat removal. Comes with Grade 8 hardware to mount the bracket to the seat and floor. Sold as a pair per seat. Weight is 3lbs w/o hardware. The back of the seat should be supported per NHRA if there is a roll bar.
** Driver and Passenger inside brackets must have the front location drilled through the floor and supported with a heavy fender washer that is supplied. The passenger inside bracket requires slight massaging of the floor depending on the hole location.**
Click the link below for the HRS bolt-on seat back brace.
If you have factory bench floor mounts, you will need to add the inner bucket seat brackets to your car. This has the added benefit of making it NHRA legal since it is not allowed to just bolt the seat to the bare floor pan. They are available from multiple vendors and a little searching will find installation articles.
