Product Description:
HAWKS Donald Thump Cam LS3 L92 L76 | 235/243 .649"/.600" 111 LSA
SPECS:
Duration @ .050": 235 Intake / 243 Exhaust
Gross valve Lift: .649" Intake / .600" Exhaust
Lobe Separation Angle (LSA): 111°
Intake Center Line (ICL): 109.5
NOTE: This is a 3 bolt cam, for models with a single bolt cam (Gen IV LS Engines) you will need a 3 bolt cam conversion kit which we sell as well.
Introducing the Donald Thump LS3/L92 cam, this is an excellent performance camshaft with an aggressive idle for that #MACA (Make America Chop Again) status! Perfect cam for customers wanting BILLIONS AND BILLIONS of chop that still offers adequate piston-to-valve clearance on a stock short-block. This camshaft is designed for all-out power and shows gains over the stock camshaft beginning at 3,100 RPM. This cam made 93HP more than the factory LS3 camshaft! We recommend a minimum stall speed of 3,600 RPM for this camshaft in auto-equipped vehicles for streetability, but it would benefit at the track from a 4,000+ RPM stall speed. This cam is designed for LS2/L76/LS3/L92 engines using L92/LS3 rectangle port cylinder heads!
