Product Description:
GM 25036751 3/8" NPT Threaded Intake Air Temperature Sensor IAT w/ Bung Turbo LS
LSX Threaded IAT (Intake Air Temp) Sensor w/ Screw In Bung, this is for car's running high boost so that the IAT sensor does not blow out. It will fit many application and is a 2 wire IAT sensor.
NOTE: The aluminum bung will need to be welded into your intake pipe or cold air induction, also you may need to re-tap the threads in the bung as welding the bung may distort the threads.
NOTE: 5 wire MAF sensor (85mm C5 Z06, LS3/LS7 card style, 5 wire truck) with a built IAT will need to re-pin the 2 wires. Use the tan and solid black wires to run the IAT sensor. These are located on the PCM RED connector pin 25 for the Tan wire, then pin 57 for the black wire.
