Product Description:
93-2002 Camaro / Firebird BAER Rear 13" Pro+ Brake System with Park Brake
This system features the 6P 6-piston caliper mounted to a 13", 2 piece slot, drill, zinc plated rotor. The 6P caliper has D.O.T compliant dust and weather seals and uses the popular D0731 pad type. Rotors are pre-assembled with NAS high grade stainless hardware. Baer’s unique backing plate not only acts as a caliper mount, but also houses a modern 1-piece park brake shoe assembly. Stainless braided hoses are also included. The 13” Pro+ fits most 17” or larger wheels.
| Rotor Size/Type:
13" x 1.10", 2-piece
| Replacement Rotor Rings:
6910138 (Left) / 6920138 (Right)
| Caliper/Piston Count/Mount Type:
6P / 6-piston / Radial
| Replacement pads:
D0731R
| Minimum Wheel Size:
17" (Use template to verify fitment, link below)
| System Includes:
Calipers, Brake pads, Rotor & Hat assemblies, Brackets, Park brake assembly, Stainless braided brake hoses & system hardware. System incorporates Baer's unique Verislide design allowing the calipers to float with the factory c-clip axles
| Notes:
Designed to be used with Stock GM 10/12 bolt with C-clip axles. System does not include park brake cables. 1993-97 Cars will need to get cables from Lokar or Control Cables (we can supply contact info), 1998-2002 Cars can re-use stock park brake cables.
| Applications:
- 1993-02 GM F-Body cars with OE 10/12 bolt C-clip rear end
| Why Purchase the Pro+?
- Features the 6-Piston (6P) caliper machined specifically for rear applications with smaller, yet staggered pistons, for proper brake bias and minimal pad taper
- 2-piece rotor design with a 6061 T-6 billet aluminum hat bolted to the rotor friction ring with high grade NAS (Aircraft) hardware. Rotors comes pre-assembled
- System includes Baer’s Verislide self-centering brackets that allow the caliper to float with the rotor/axle to prevent piston knock back
- Fully machined billet backing plate that also holds the banksia park brake assembly
- Standard colors are Red, Black or Silver (Custom colors and finishes also available)
| The 6P Pro+ Caliper Features:
- 6-piston, 2-piece caliper with six, 3/8” cross bolts for added strength
- Stainless steel pistons, abutments and noise suppression springs
- Staggered piston sizes to minimize pad taper
- Dual seals (dust/weather and pressure)
- Uses the C5 and C6 backing plate (1997-2013 Corvette) or the FMSI #D731
- Caliper can accept 13” and 14” rotors
- Red, Black or Silver Powder Coat Finish (custom colors available)
- Machined logo that is hand painted
- Uses correct banjo style fittings, Baer does not use any pipe thread
- 100% MADE IN USA with US sourced material
System Instructions
Template Instructions
Download Template here
