Product Description:
GM Licensed reproductions of the various Cloisonne' emblems used on the 1987 to 1990 Pontiac Trans Am GTA are now available.
Remove any previously applied emblems using a hair dryer and fishing line/dental floss. Adhesive that remains on the paint may be removed with either 3M Brand Adhesive Remover or WD-40 and a soft cloth. Clean the surface with a few drops of grease-cutting liquid detergent in water (do not use a petroleum base cleaner). Rinse clean with fresh water then dry with a lint-free cloth. Wiping surface with denatured alcohol will also help remove any contamination and enhance the adhesion process. Place a protective padded towel or rubber mat under the location you plan to work so if you inadvertently drop the emblem, no damage will result. Once you have identified the exact location to apply your emblem, place the GTA emblem face down on a soft cloth and remove the adhesive protection paper. Carefully pick your emblem up by the edges and press the edges into place with constant even pressure. Finally press the entire emblem onto your vehicle's surface using direct even pressure. Maximum adhesion will occur within 48-72 hours.
Set includes:
One Nose Emblem 87-90 Style with Stud
2 x New "PONTIAC" GOLD headlamp emblem. .. one for a spare
2 x Fender Emblems
2 x Sail panel Emblems
1 x Tail Lamp Filler Panel Emblem
Officially Licensed Emblems are all supplied with the correct double-sided tape for easy installation.
