Product Description:
J&M Products – 1982-2002 Camaro / Firebird Aluminum Adjustable Panhard Rod Rod/Rod Combo – Bare
Part # 23750 – Rod End / Rod End Combo
Made in the USA
J&M Products has designed a panhard rod system which allows you to order an adjustable panhard rod any way you want it. What we have done is to create a threaded Chrome-Moly Forged steel body end which uses polyurethane bushings and is a direct replacement for a 3/4″ rod end. The best thing about these ends is they are forged using over 90 tons of force using 4340 super high strength Chrome-Moly steel. This is the same steel most forged steel crankshafts are made from. We then CNC machine them and roll form the threads to make them the exact length and size of a rod end. These panhard rods can be ordered in 3 adjustable versions: street (which uses forged poly/forged poly ends), street/race (which uses forged poly/rod ends), and finally a race version (which uses rod end/rod end). The great thing about this system is if you choose a street version now and decide later you want to upgrade to a race or street/race panhard rod, all you have to do is order the ends from us instead of a complete new panhard rod.
Our tubular adjustable panhard rods are the finest on the market. Manufactured from high strength aluminum alloy or high strength DOM steel tubing, our ultra light panhard rods will eliminate the unwanted flex and twist commonly found in the factory and other poorly designed aftermarket panhard rods. These rods will give you a competitive edge by keeping the rear axle located in the optimum position under the rear of the car, thereby dramatically improving cornering and overall handling predictability. The rod easily adjusts on the car to compensate for ride height adjustments. Our aluminum rods feature a one piece no weld center support rod with machined wrench flats with left and right handed threads for easy adjustments of the rod while still on the vehicle.
Spherical Bearings Features and Benefits:
- Built to J&M specifications making it the strongest longest lasting rod end on the market
- 52100 heat treated steel/hard chrome plated ball
- Bearing body & race is heat treated 4340 chrome-moly steel
- Bearing liner is upgraded super strong sintered bronze wire impregnated with PTFE powder, same as modern ball joints
- Threads are rolled not cut after the heat treat process for maximum strength
Panhard Rod Features:
- Modular System to reduce overall costs during upgrades
- One piece aluminum rod
- Easily change between rod ends and poly forged ends
- Double adjustable for easy on car adjustment
- Made In The USA!
Fits: 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 Chevrolet Camaro & Pontiac Firebird
J&M Products – 1982-2002 Camaro / Firebird On Car Aluminum Adjustable Lower Control Arms – Black
Part # 23962B – Rod Ends Both Sides
Made in the USA
Improve traction and handling by eliminating bushing compliance and correcting suspension geometry. Unlike our competitors who charge more and use low quality commercial grade 2 piece rod ends we use a Very High Precision PTFE Lined Spherical rod end that uses a very high strength heat treated alloy steel race with a PTFE liner for extra strength and life. The precision rod ends used gives precise axle control, eliminating the compliance that leads to wheel hop, while still allowing the rear suspension to articulate freely. Our lightweight control arms weigh less than 2.5 pounds which make them almost 9 pounds lighter than the factory control arms. These control arms are designed for the race track and not recommended for street use.
Lower Control Arms Bare Aluminum Features and Benefits:
- On car adjustable for easy chassis setup
- 52100 heat treated steel/hard chrome plated ball
- Bearing race is heat treated 4340 chrome moly steel
- Bearing liner is sintered bronze wire impregnated with PTFE powder, same as modern ball joints.
- Rod end bodies are constructed of heat treated chrome moly alloy steel
- Threads are rolled not cut after the heat treat process for maximum strength
- Available in bare aluminum, red powder coat, & black powder coat
Fits: 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 Camaro/Firebird F-Body
