2016-2022 Chevrolet 6th Gen Camaro Medium Duty Front Drag Racing Brake Kit (Reusing Factory Hubs) - 001-0279-1, TBM Brakes

Install Instructions

2016-2022 Camaro (6th gen), medium duty front drag kit (Reusing Factory Hubs) - 001-0279-1

Note: This brake kit allows for use of 15" wheels

Saves ~28lbs per corner over factory Camaro SS Brakes. 56+lbs savings per kit.

Note: ZL1 weight savings may be greater than 56lbs.

• F3 Caliper 1.75" Diameter Stainless Steel Piston .500 Rotor - 002-0192SSP-1
• F3 Caliper 1.75" Diameter Stainless Steel Piston .500 Rotor - 002-0192SSP-2
• Revolution Rotors - 11.75/0.500 / 8 on 7.00" - 3-1175500D
• F3 to 5th Gen Camaro (10-15) 11.75" Rotor Front Caliper Bracket - 16-02633
• Hat 5 on 4.50/4.75 - 204-0015
• Hardware Kit 6th Gen Spindle Drag Racing F3 011-0279
• F3 Brake Pads #1 (full set) - 6-0102W
• Rotor Bolt Kit 5/16-18 X 3/4 Long (8 Ears) with washers - 011-0036

⚠ WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov

We recommend using TBM DOT 5.1 Extreme 6 Brake Fluid for all TBM Brake Kits. You'll need at least 4 (12 oz) bottles of fluid when building and plumbing a new system that is empty.

*Please use red loctite on all rotor bolts*

Brake Lines and Fittings for this kit for plumbing to factory lines (not included):

-20" 3AN PTFE Line (x2)

-Adapter M10x1 to 3AN (x2) Click Here