Replacement rubber bump stops bolt in place of damaged or worn factory bump stops using existing mounting holes. Minor trimming of mounting flange on car is required. These bump stops are highly...
UMI’s performance lowering springs are built to lower the 4th Gen front end approx. 1.25” and increase the spring rates for a crisp handling experience. UMI front springs are Made in USA of 5160 CrSi...
This kit is highly recommended when installing an aftermarket torque arm to the Moser 12-bolt rear end. The Moser 12-Bolt rear end is supplied with four ½” mounting holes while most aftermarket...
UMI’s 4th Gen F-body competition coilover package is built to perform.
UMI’s rear coilover kit includes: 2 coilover shocks, 2 springs with proper spring rate, fabricated bolt in mounting brackets...
UMI’s bolt-in rear coilover kit allows full ride height, spring rate and damping adjustability for your 1982-2002 Camaro and Firebird. The double shear upper mount is a direct bolt-in and holds a...
UMI’s 35mm (1-⅜”) solid front sway bar is designed to reduce body roll and increase responsiveness and cornering capabilities of the 3rd Gen. UMI’s front sway bar is 22% more rigid than the hollow...
1982-1992 GM F-Body Transmission Crossmember – 4L60E
UMI’s 2251 transmission crossmember positively locates the 4L60E into the 3rd Gen F body chassis. The 2251 is suitable for street, strip,...
Replacement rubber bump stops bolt in place of damaged or worn factory bump stops using existing mounting holes. Minor trimming of mounting flange on car is required. These bump stops are highly...
UMI’s performance lowering springs are built to lower the 4th Gen front end approx. 1.25” and increase the spring rates for a crisp handling experience. UMI front springs are Made in USA of 5160 CrSi...
This kit is highly recommended when installing an aftermarket torque arm to the Moser 12-bolt rear end. The Moser 12-Bolt rear end is supplied with four ½” mounting holes while most aftermarket...
UMI’s 4th Gen F-body competition coilover package is built to perform.
UMI’s rear coilover kit includes: 2 coilover shocks, 2 springs with proper spring rate, fabricated bolt in mounting brackets...
UMI’s bolt-in rear coilover kit allows full ride height, spring rate and damping adjustability for your 1982-2002 Camaro and Firebird. The double shear upper mount is a direct bolt-in and holds a...
UMI’s 35mm (1-⅜”) solid front sway bar is designed to reduce body roll and increase responsiveness and cornering capabilities of the 3rd Gen. UMI’s front sway bar is 22% more rigid than the hollow...
1982-1992 GM F-Body Transmission Crossmember – 4L60E
UMI’s 2251 transmission crossmember positively locates the 4L60E into the 3rd Gen F body chassis. The 2251 is suitable for street, strip,...
Lug Nut Caps SET OF 5, Camaro / Firebird 82-2002 Black Wheel Lug Nut Plastic Cap. These are new reproduction of the lug nut cap for some 82-2002 Camaro's & Firebird's. These...
Camaro/Firebird 82-92 Interior Hatch Screw Nuts, New Reproduction, Package of 10. This is for the rear hatch area trim plastic screws. Original GM have been discontinued.
93-02 Camaro/Firebird Hood Adjust Bumper Rubber Stop, Outer Side, New GM, Original. 2 required per vehicle. This is an original GM part.
Fixed Shipping within the continental US
Newly redesigned for improved longevity! This kit has been redesigned and re-engineered for the 1993-1997 Firebird, 1998-2002 Firebird and late style (Late 2000-2004) C5 Corvette plastic housing...