Sensor is made of brass for strength and high heat and cold tolerance. Common metri-pack connector is readily available. Small 3/8" NPT Thread allows sensor to be installed in small areas for custom applications. Robust Brass cage Premium...

Designed to funtion in conjunction with the widely available GM style Intake Air Temperature Sensor, the module is ideal when trying to measure parameters such as engine inlet air, temps before and after intercooler/heat exchangers or even brake...

Provides an easy and economical way to measure air temperature and convert to a universal 0-5V output. Designed around the widely available GM-style Intake Air Temperature Sensors, the FAST® Air Temp Sensor & Converter Kit is ideal when trying to...

LSX 100mm Black/Silver MAF Mass Air Flow Sensor Kit LS3 Blade Style LS1/LS2/LS6 This MAF sensor kit is recommended for supercharged, turbocharged and other high output LSX engine applications looking for maximum air flow.  The large diameter,...

Mass Air Flow Sensor, 4"/100mm Mass Air Flow Sensor w/ Blade Style MAF, LSX Applications Only   It is recommended to buy our 100mm honeycomb MAF screen to install in this MAF housing to straighten the air before it goes through the sensor! ...

Adapter, 5 Wire To 5 Wire LS3 Blade Style MAF Harness Adapter

3 Wire To 5 Wire LS3 Blade Style MAF Harness Adapter   This adapter harness allows for plug and play installation of a late-model GM / Delphi 5-wire MAF using the wide-spaced GT150 Series connector (2006+ Z06 Corvette) in a 3-wire MAF car...

Mass Air Flow Screen ONLY, Honeycomb Screen 100mm for Mass Air Flow Sensor   Made for 100mm MAF Mass Air Flow Sensors ONLY. This Honeycomb Screen straightens out the air flow when it crosses over the mass sensor itself.    Press in...

Universal LS3 Style 5 Wire Mass Air Flow Sensor MAF w/ Weld-On Bung This is for customers wanting to do a custom intake set-up, this kit comes with a new GM 5 wire LS3 style MAF (Mass Air Flow) sensor, aluminum weld-on bracket, and 2 stainless stell...

Mass Air Flow Sensor, TSP 100mm Mass Air Flow Sensor, LSX Applications Only-    The  TSP 100mm MAF is 100% American made!  The package includes the billet MAF sensor housing, a new GM sensor, a 4" silicone coupler, and MAF...

Adapter, 85mm MAF 3 Wire To 5 Wire (LS2 Style) Adapter.  When converting your LT1 or LS1 from the factory 3 wire MAF to an 85mm 5 wire LS2 style MAF, you will need this MAF adapter to attach to the factory harness. This will allow the built in IAT...

2005-2006 GTO 6.0L V8 K & N FIPK Air Induction Package-63 Series Intake Kits or AirCharger® Intakes are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone. They enjoy a faster speed...